Pi & Accs

Orange Pi SBC and accessories for Pi and Arduino

Sort By:  
2xUSB, composite A/V, mic and IR
Out of Stock
CAD$6.99
Orange Pi 3 Enclosure
CAD$19.99
FTDI USB to UART Converter with Break Out
Out of Stock
CAD$5.89
Orange Pi Zero Enclosure
CAD$6.99
FTDI USB to UART Converter
CAD$3.89
Pi3Acrylic
RaspBerry Pi3 B+ Acrylic Case - Fan / HeatSink
CAD$4.99
Matrix KeyPad for GPIO
CAD$0.00
USB to WiFi Adapter
CAD$0.00
5V Fan
Out of Stock
CAD$4.99
JDY-30/31 Slave Serial Xcvr - Android
CAD$4.99
AT-09 BlueTooth BLE Serial module - IOS
CAD$5.49
2 pc Heat Sink Kit - RaspBerry
CAD$3.49
USB to UART Converter 3.3V
CAD$0.00
μSDcard storage
CAD$0.00
Orange Pi Zero Expansion (pi0exp)

Orange Pi Zero Expansion Board

provides:
  • Two USB 2.0 type-A ports
  • Composite Audio/Video output (1/8" jack)
  • Microphone
  • IR Receiver
  • connects via 13pin header
2xUSB, composite A/V, mic and IR
Out of Stock
CAD$6.99
Orange Pi 3 Case (Pi3case)
Enclosure includes Fan
Orange Pi 3 Enclosure
CAD$19.99
FTDI Break Out USB to UART (FTDI-BO)
  • Connect to your Pi or Arduino Serial Port via USB


FTDI USB to UART Converter with Break Out
Out of Stock
CAD$5.89
Orange Pi Zero Case (Opi0case)
3D printed to hold Orange Pi Zero and expansion board.
Orange Pi Zero Enclosure
CAD$6.99
FTDI USB to UART (FTDI)
  • Connect to your Pi or Arduino Serial Port via USB
  • Connect the 3 female jumper connectors to your development board's RX, TX and GND pins
  • Then use Putty to communicate with the corresponding COM port such as /dev/ttyUSB0


FTDI USB to UART Converter
CAD$3.89
Pi3Acrylic
RaspBerry Pi3 B+ Acrylic Case (Pi3Acrylic)
RaspBerry Pi3 B+ Acrylic Case

Optional  Fan and/or HeatSink

RaspBerry Pi3 B+ Acrylic Case - Fan / HeatSink
CAD$4.99
Matrix KeyPad (KeyPad)
Matrix KeyPad for GPIO
CAD$0.00
USB WiFi (WiFi)

WiFi USB dongle:

  • 150Mbps
  • IEEE 802.11 n/g/b


Driver at MediaTek

USB to WiFi Adapter
CAD$0.00
Pi-Fan (Pi-Fan)
5VDC - 2 pin connector 200mA 3cm
5V Fan
Out of Stock
CAD$4.99
JDY-31 BlueTooth module (JDY-31)
JDY-30 BlueTooth Classic Rs-232 module for Arduino or Pi
Android compatible - "AT" commands can select
Baud Rate, Name, etc.
JDY-30/31 Slave Serial Xcvr - Android
CAD$4.99
AT-09 BlueTooth BLE module (AT-09)
AT-09 BlueTooth Rs-232 module for Arduino or Pi
BLE - AT-09 IOS/Android compatible - "AT" commands
AT-09 BlueTooth BLE Serial module - IOS
CAD$5.49
Heat Sink Kit (HSink3)
2 pc Heat Sink Kit for RaspBerry Pi or Orange Pi or ESP8266/ ESP32 / Motor Controller Aluminium with peel off mounting tape.
2 pc Heat Sink Kit - RaspBerry
CAD$3.49
USB to UART (USBUART)
  • Connect to your Pi or Arduino Serial Port via USB
  • Connect the 3 female jumper connectors to your development board's RX, TX and GND pins
  • Then use Putty to communicate with the corresponding COM port such as /dev/ttyUSB0


  • The Prolific is NOT Recommended for Windows 8 or 10
USB to UART Converter 3.3V
CAD$0.00
SDram (μSDcard)
μSDcard storage cards
Class 10
μSDcard storage
CAD$0.00
Per Page      1 - 14 of 14
  • 1